傳送失敗問題

[chulien]

請問一下..下列錯誤訊息..如何解謝謝....我主機有4個網域在用..
helo欄位可以設定4個網域嗎.. 反解4個網域都有設定..
傳送郵件從 joe@zwilling.com.tw 到 chester@variconinc.com(184.154.141.98)550 Access denied - Invalid HELO name (See RFC2821 4.1.3))

[WuKueiWei]

DNS檢測有問題，請參閱下列URL
http://rs.twnic.net.tw/cgi-bin/dns.cgi?dn=zwilling.com.tw
_________________
OS System
=====================
Windows 10 Pro
RaidenMAILD 5.0.4
=====================
theSun Information Co., Ltd.

[WuKueiWei]

RFC2821 4.1.3 Address Literals

Sometimes a host is not known to the domain name system and
communication (and, in particular, communication to report and repair
the error) is blocked. To bypass this barrier a special literal form
of the address is allowed as an alternative to a domain name. For
IPv4 addresses, this form uses four small decimal integers separated
by dots and enclosed by brackets such as [123.255.37.2], which
indicates an (IPv4) Internet Address in sequence-of-octets form. For
IPv6 and other forms of addressing that might eventually be
standardized, the form consists of a standardized "tag" that
identifies the address syntax, a colon, and the address itself, in a
format specified as part of the IPv6 standards [17].

Specifically:

IPv4-address-literal = Snum 3("." Snum)
IPv6-address-literal = "IPv6:" IPv6-addr
General-address-literal = Standardized-tag ":" 1*dcontent
Standardized-tag = Ldh-str
; MUST be specified in a standards-track RFC
; and registered with IANA

Snum = 1*3DIGIT ; representing a decimal integer
; value in the range 0 through 255
Let-dig = ALPHA / DIGIT
Ldh-str = *( ALPHA / DIGIT / "-" ) Let-dig

IPv6-addr = IPv6-full / IPv6-comp / IPv6v4-full / IPv6v4-comp
IPv6-hex = 1*4HEXDIG
IPv6-full = IPv6-hex 7(":" IPv6-hex)
IPv6-comp = [IPv6-hex *5(":" IPv6-hex)] "::" [IPv6-hex *5(":"
IPv6-hex)]
; The "::" represents at least 2 16-bit groups of zeros
; No more than 6 groups in addition to the "::" may be
; present
IPv6v4-full = IPv6-hex 5(":" IPv6-hex) ":" IPv4-address-literal
IPv6v4-comp = [IPv6-hex *3(":" IPv6-hex)] "::"
_________________
OS System
=====================
Windows 10 Pro
RaidenMAILD 5.0.4
=====================
theSun Information Co., Ltd.

[Arnor]

1. 通常 IP 只能設一個反解, 您向 ISP 申請時可以看看它的範例
2. 把maild 的[伺服器設定]-[網域設定]-[HELO/EHLO Hostname] 設成上述反解就可以了.
_________________
*若是想問問題的話, 請務必不要塗改任何 IP, 網域資料, 您若不願貼上IP或網域, 請改以電子郵件來詢問. 謝謝您的配合.*
*若是回報疑似軟體的運行或邏輯或資料處理有誤的問題, 小弟很樂意去了解您的情況, 但請務必以最新版來做回報, 如果以郵件詢問, 請參考 http://www.raidenmaild.com/tw/feedback.html 的說明, 最好標題加個 RaidenMAILD 字樣, 才不致會遺漏了您的信唷. 謝謝您的配合^^*
*在版上發文請遵守網路禮儀, 並請持著虛心敘述問題請教他人, 凡發現違反的文, 均一律刪除為優先, 不另行通知喔.
*與使用者教學相長腦力激盪是我輩成就感的來源, 誠心希望您能不吝指教.
*雷電MAILD 知識庫文件 http://www.raidenmaild.com/tw/kb/

素還尊
Team John Long.
Email: arnor@raidenmaild.com
公司網站 http://www.raidenmaild.com/company/

[chulien]

1. 通常 IP 只能設一個反解, 您向 ISP 申請時可以看看它的範例
就可以了.
2. 把maild 的[伺服器設定]-[網域設定]-[HELO/EHLO Hostname] 設成上述反解
@@中華電信現在可以申請多個反解了,我有4個網域就是不知道,
[網域設定]-[HELO/EHLO Hostname]欄位要設定哪個網域

如果設定a網域,那b.c.d的網域寄信會出現 550 Access denied - Invalid HELO name (See RFC2821 4.1.3))

如果設定b網域,那a.c.d的網域寄信也會出現550 Access denied - Invalid HELO name (See RFC2821 4.1.3))

[Arnor]

你有以下的錯誤

1. (確定) 你的MX 有一筆設成 IP

2. (可能) 反解你設成4筆, 怕是對方根本無法認這種4筆PTR

3. (可能) 或許你搞錯你的連外IP, 建議從伺服器去連 http://www.whatismyipaddress.com 確認一下你的連外IP
_________________
*若是想問問題的話, 請務必不要塗改任何 IP, 網域資料, 您若不願貼上IP或網域, 請改以電子郵件來詢問. 謝謝您的配合.*
*若是回報疑似軟體的運行或邏輯或資料處理有誤的問題, 小弟很樂意去了解您的情況, 但請務必以最新版來做回報, 如果以郵件詢問, 請參考 http://www.raidenmaild.com/tw/feedback.html 的說明, 最好標題加個 RaidenMAILD 字樣, 才不致會遺漏了您的信唷. 謝謝您的配合^^*
*在版上發文請遵守網路禮儀, 並請持著虛心敘述問題請教他人, 凡發現違反的文, 均一律刪除為優先, 不另行通知喔.
*與使用者教學相長腦力激盪是我輩成就感的來源, 誠心希望您能不吝指教.
*雷電MAILD 知識庫文件 http://www.raidenmaild.com/tw/kb/

素還尊
Team John Long.
Email: arnor@raidenmaild.com
公司網站 http://www.raidenmaild.com/company/